1310 Heavy Duty Front Driveshaft Automatic Transmission 2007-2011 JK

1310 Heavy Duty front driveshaft for 2 and 4 door Jeep JK models with an automatic transmission.

This system is a stronger than O.E. type applications recommended for stock to 4.5" lift and up to 35" tires for mild use. *2 door models with 4.5" of lift are recommended to use our 1350 rear driveline. J.E. Reel Drivelins are designed to work with 2.5"-4.5" lifts from most manufactures. Lifts higher than 4.5" or long arm lifts must be measured for driveline length. See our J.E. Reel "Modifying your Vehicle" page for information on how measure your driveline.

Kit Includes :
2"x.120 Tubing
1310 U-Joints
Cast U-Bolt Style Yoke
1310 U-bolts
T/C Yoke
Grade 8 Hardware
Installation Instructions

Requirements:
0 "-4.5" short arm suspension kit installed.
Dana 44 or Dana 30 Front axle
Up to 35" tires

If you have an application other then the requirements listed above you can still order this kit but you will need to provide us with measurements on how to build your custom driveline. The pricing will remain the same.

For Jeep Wrangler 2007-2011

Driveshaft
Tube Size 2"x.120"
Driveline Kit
U-joints /C.V. 1310 U-Joints
Yoke / Flange Cast U-Bolt Style Yoke
T/C Yoke
Hardware 1310 U-bolts
Grade 8 Hardware
Misc. Installation Instructions
Requirements
Requirements 0 "-4.5" short arm suspension kit installed.
Dana 44 or Dana 30 Front axle.
Up to 35" tires.
*Notes If you have an application other then the requirements listed above you can still order this kit but you will need to provide us with measurements on how to build your custom driveline. The pricing will remain the same.

Write a review

Please login or register to review
  • Product Code:
    31JK-24F
  • Availability: In Stock
  • $489.00

Tags: jeep, jk, wrangler, 1310, Heavy, heavey, Duty, Front, Driveshaft, drive, shaft, Automatic, Transmission, tranny, 2007, 2008, 2009, 2010, 2011