1350 Heavy Duty Front Driveshaft Automatic Transmission 2007-2011 JK

1350 Heavy Duty front driveshaft for 2 and 4 door Jeep JK models with an automatic transmission.

This system is a stronger than our 1310 style shaft and takes you from a 26* C.V. angle to a 32* C.V. angle.

Lifts higher than 4.5", long arm lifts & any orher than stock rear axle must be measured for driveline length. See our J.E. Reel "Modifying your Vehicle" page for information on how measure your driveline.

Kit Includes :
2"x.120 Tubing
1350 U-Joints
Cast U-Bolt Style Yoke
1350 U-bolts
Forged T/C Flange
Grade 8 Hardware
Installation Instructions

Requirements:
Dana 44 or Dana 30 Front axle for bolt on application

If you have an application other then the requirements listed above you can still order this kit but you will need to provide us with measurements on how to build your custom driveline. The pricing will remain the same.

For Jeep Wrangler 2007-2011

Driveshaft
Tube Size 2"x.120"
Driveline Kit
U-joints /C.V. 1350 U-Joints
Yoke / Flange Cast U-Bolt Style Yoke
Forged T/C Flange
Hardware 1350 U-bolts
Grade 8 Hardware
Misc. Installation Instructions
Requirements
Requirements Dana 44 or Dana 30 Front axle for bolt on application
*Notes If you have an application other then the requirements listed above you can still order this kit but you will need to provide us with measurements on how to build your custom driveline. The pricing will remain the same.

Write a review

Please login or register to review
  • Product Code:
    35JK-24F
  • Availability: In Stock
  • $699.95

Tags: jeep, jk, wrangler, 1350, Heavy, heavey, Duty, Front, Driveshaft, drive, shaft, Automatic, manual, Transmission, tranny, 2007, 2008, 2009, 2010, 2011