Build a Custom Driveline

What Type Of Vehicle Do You Have

How Many Pieces is Your Driveshaft?

What Type of U-joint do you have on the transmission side?

What Size U-Joints Do You Have That Attaches on the Transmission Side?

What Type of U-Joints Do You Have on the Axle Side?

What Size U-Joints Do You Have That Attaches on the Axle Side?

Is There any Additional Information We Need to Know About the U-Joints?

What is Your Transmission Type?

What is attached to the transmission?

What size flange do you have?

What size flange do you have?

What type of axle do you have?

What is attached to the Axle?

What size yoke do you have?

Note: With the Spline Diameter measure from the bottom of the groove to the bottom of the groove on the opposite end When measuring Bolt holes measure from the center of the bolt

Does your driveshaft look like this?

Is there any additional information we need to know about the drive shaft?

Appendix

What size slip yoke do you have?

Note: With the Spline Diameter measure from the bottom of the groove to the bottom of the groove on the opposite end

What size slip yoke do you have?

Note: With the Spline Diameter measure from the bottom of the groove to the bottom of the groove on the opposite end

What size yoke do you have for your CV?

Note: With the Spline Diameter measure from the bottom of the groove to the bottom of the groove on the opposite end When measuring Bolt holes measure from the center of the bolt

You have a 4x4 Vehicle. Does your driveshaft have a Double Cardan Joint (CV)?